Population and dwelling counts Hamilton CMA and CSD 2021

Original Table: Population and dwelling counts: Census metropolitan areas, census agglomerations and census subdivisions (municipalities) (1) Frequency: Occasional Table: 98-10-0003-01 Release date: 2022-02-09 Geography: Census subdivision, Census metropolitan area, Census agglomeration Universe: All persons, 2021 and 2016 censuses – 100% data Variable List: Population and dwelling counts (13) List of abbreviations and acronyms found within various Census products.
(https://www12.statcan.gc.ca/census-recensement/2021/ref/symb-ab-acr-eng.cfm)

Footnotes appear in brackets in text.
1) Content considerations The 2021 Census population counts for a particular geographic area represent the number of Canadians whose usual place of residence is in that area, regardless of where they happened to be on Census Day. Also included are any Canadians who were staying in that area on Census Day and who had no usual place of residence elsewhere in Canada, as well as those considered to be non-permanent residents. For most areas, there is little difference between the number of usual residents and the number of people staying in the area on Census Day. For certain places, however, such as tourist or vacation areas, or those including large work camps, the number of people staying in that area at any particular time could significantly exceed the number of usual residents shown here. The population counts include Canadians living in other countries, but do not include foreign residents living in Canada. Given these differences, users are advised not to interpret population counts as being the number of people living in the reported dwellings. The dwelling counts refer to total private dwellings and private dwellings occupied by usual residents in Canada. The census dwelling counts do not include collective dwellings, which are dwellings of a commercial, institutional or communal nature. The usual residents in collective dwellings are, however, included in the population counts. Changes occur to the names, boundaries and other characteristics of geographic areas (e.g., census subdivisions may amalgamate, or there may be an annexation or a change of name or status). Since the geographic framework is used for census data collection, the geographic reference date must be set several months before the date of the census in order to have these changes made in time. For the 2021 Census, the geographic reference date was January 1, 2021. Land area is the area in square kilometres of the land-based portions of standard geographic areas. The data are unofficial, and are provided for the sole purpose of calculating population density. Land area data for the standard geographic areas reflect the boundaries in effect on January 1, 2021 (the geographic reference date for the 2021 Census of Canada). Definitions The Census Dictionary is a reference document which contains detailed definitions of Census of Population concepts, universes, variables, and geographic terms, as well as historical information Incompletely enumerated reserves and settlements
In 2021, a total of 63 census subdivisions defined as reserves and settlements were incompletely enumerated. For these reserves and settlements, dwelling enumeration was either not permitted or could not be completed because of the various reasons below. This represents an increase compared with the 14 census subdivisions defined as reserves and settlements that were incompletely enumerated in the 2016 Census. Health and safety restrictions put in place to slow the spread of COVID-19 and natural events (including evacuations because of forest fires) contributed to the incomplete enumeration of many reserves and settlements. The 2021 Census population and dwelling counts are not available for the 63 incompletely enumerated reserves and settlements, and are not included in 2021 Census tabulations. Data for geographic areas containing one or more of these reserves and settlements are noted accordingly. Because of the missing data, users are cautioned that—for the affected geographic areas—comparisons (e.g., percentage change) between 2016 and 2021 may not be precise. The impact of the missing data for higher-level geographic areas (Canada, provinces and territories, census metropolitan areas and census agglomerations) is usually very/ small. However, the impact can be significant for lower-level geographic areas (e.g., census divisions), where incompletely enumerated reserves and settlements account for a higher proportion of the population. This is especially true for lower-level geographic areas where a particular reserve or settlement was incompletely enumerated for the 2021 Census but enumerated for the 2016 Census and, vice versa. Adjustment of population counts Statistics Canada is committed to protect the privacy of all Canadians and the confidentiality of the data they provide to us. As part of this commitment, some population counts of geographic areas are adjusted in order to ensure confidentiality. Counts of the total population are rounded to a base of 5 for any dissemination block having a population of less than 15. Population counts for all standard geographic areas above the dissemination block level are derived by summing the adjusted dissemination block counts. The adjustment of dissemination block counts is controlled to ensure that the population counts for dissemination areas will always be within 5 of the actual values. The adjustment has no impact on the population counts of census divisions and large census subdivisions. Dwelling counts are not adjusted. Difference between census counts and population estimates. The Census of Population is designed to conduct a complete count of the population. Inevitably, however, some individuals will not be enumerated (undercoverage), while others, usually less numerous, will be enumerated more than once (overcoverage). To determine the number of people who were missed or counted more than once, Statistics Canada conducts postcensal studies of the coverage of the census population, using representative samples of the population. Results of these studies are usually available two years after Census Day. They are used, in combination with census figures and other sources, to develop the population estimates produced by Statistics Canada on a regular basis. Population estimates are used for equalization payments, to follow trends in the Canadian population on a quarterly basis and to understand the underlying components of population change (for example, births, deaths, immigrants, emigrants and non-permanent residents). Population estimates differ from census counts and are usually higher, because census counts are not adjusted for under-coverage or over-coverage.
Cite: Statistics Canada. Table 98-10-0003-01  Population and dwelling counts: Census metropolitan areas, census agglomerations and census subdivisions (municipalities) https://www150.statcan.gc.ca/t1/tbl1/en/tv.action?pid=9810000301

Datasets available for download

Additional Info

Field Value
Last Updated March 25, 2026, 01:50 (UTC)
Created March 25, 2026, 01:50 (UTC)
Domain / Topic
Domain or topic of the dataset being cataloged.
Title
Title for the Dataset.
Population and dwelling counts Hamilton CMA and CSD 2021
Description
A description of the dataset.

Original Table: Population and dwelling counts: Census metropolitan areas, census agglomerations and census subdivisions (municipalities) (1) Frequency: Occasional Table: 98-10-0003-01 Release date: 2022-02-09 Geography: Census subdivision, Census metropolitan area, Census agglomeration Universe: All persons, 2021 and 2016 censuses – 100% data Variable List: Population and dwelling counts (13) List of abbreviations and acronyms found within various Census products.
(https://www12.statcan.gc.ca/census-recensement/2021/ref/symb-ab-acr-eng.cfm)

Footnotes appear in brackets in text.
1) Content considerations The 2021 Census population counts for a particular geographic area represent the number of Canadians whose usual place of residence is in that area, regardless of where they happened to be on Census Day. Also included are any Canadians who were staying in that area on Census Day and who had no usual place of residence elsewhere in Canada, as well as those considered to be non-permanent residents. For most areas, there is little difference between the number of usual residents and the number of people staying in the area on Census Day. For certain places, however, such as tourist or vacation areas, or those including large work camps, the number of people staying in that area at any particular time could significantly exceed the number of usual residents shown here. The population counts include Canadians living in other countries, but do not include foreign residents living in Canada. Given these differences, users are advised not to interpret population counts as being the number of people living in the reported dwellings. The dwelling counts refer to total private dwellings and private dwellings occupied by usual residents in Canada. The census dwelling counts do not include collective dwellings, which are dwellings of a commercial, institutional or communal nature. The usual residents in collective dwellings are, however, included in the population counts. Changes occur to the names, boundaries and other characteristics of geographic areas (e.g., census subdivisions may amalgamate, or there may be an annexation or a change of name or status). Since the geographic framework is used for census data collection, the geographic reference date must be set several months before the date of the census in order to have these changes made in time. For the 2021 Census, the geographic reference date was January 1, 2021. Land area is the area in square kilometres of the land-based portions of standard geographic areas. The data are unofficial, and are provided for the sole purpose of calculating population density. Land area data for the standard geographic areas reflect the boundaries in effect on January 1, 2021 (the geographic reference date for the 2021 Census of Canada). Definitions The Census Dictionary is a reference document which contains detailed definitions of Census of Population concepts, universes, variables, and geographic terms, as well as historical information Incompletely enumerated reserves and settlements
In 2021, a total of 63 census subdivisions defined as reserves and settlements were incompletely enumerated. For these reserves and settlements, dwelling enumeration was either not permitted or could not be completed because of the various reasons below. This represents an increase compared with the 14 census subdivisions defined as reserves and settlements that were incompletely enumerated in the 2016 Census. Health and safety restrictions put in place to slow the spread of COVID-19 and natural events (including evacuations because of forest fires) contributed to the incomplete enumeration of many reserves and settlements. The 2021 Census population and dwelling counts are not available for the 63 incompletely enumerated reserves and settlements, and are not included in 2021 Census tabulations. Data for geographic areas containing one or more of these reserves and settlements are noted accordingly. Because of the missing data, users are cautioned that—for the affected geographic areas—comparisons (e.g., percentage change) between 2016 and 2021 may not be precise. The impact of the missing data for higher-level geographic areas (Canada, provinces and territories, census metropolitan areas and census agglomerations) is usually very/ small. However, the impact can be significant for lower-level geographic areas (e.g., census divisions), where incompletely enumerated reserves and settlements account for a higher proportion of the population. This is especially true for lower-level geographic areas where a particular reserve or settlement was incompletely enumerated for the 2021 Census but enumerated for the 2016 Census and, vice versa. Adjustment of population counts Statistics Canada is committed to protect the privacy of all Canadians and the confidentiality of the data they provide to us. As part of this commitment, some population counts of geographic areas are adjusted in order to ensure confidentiality. Counts of the total population are rounded to a base of 5 for any dissemination block having a population of less than 15. Population counts for all standard geographic areas above the dissemination block level are derived by summing the adjusted dissemination block counts. The adjustment of dissemination block counts is controlled to ensure that the population counts for dissemination areas will always be within 5 of the actual values. The adjustment has no impact on the population counts of census divisions and large census subdivisions. Dwelling counts are not adjusted. Difference between census counts and population estimates. The Census of Population is designed to conduct a complete count of the population. Inevitably, however, some individuals will not be enumerated (undercoverage), while others, usually less numerous, will be enumerated more than once (overcoverage). To determine the number of people who were missed or counted more than once, Statistics Canada conducts postcensal studies of the coverage of the census population, using representative samples of the population. Results of these studies are usually available two years after Census Day. They are used, in combination with census figures and other sources, to develop the population estimates produced by Statistics Canada on a regular basis. Population estimates are used for equalization payments, to follow trends in the Canadian population on a quarterly basis and to understand the underlying components of population change (for example, births, deaths, immigrants, emigrants and non-permanent residents). Population estimates differ from census counts and are usually higher, because census counts are not adjusted for under-coverage or over-coverage.
Cite: Statistics Canada. Table 98-10-0003-01  Population and dwelling counts: Census metropolitan areas, census agglomerations and census subdivisions (municipalities) https://www150.statcan.gc.ca/t1/tbl1/en/tv.action?pid=9810000301
Tags / Keywords
Keywords/tags categorizing the dataset.
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
Dataset Size
Dataset size in megabytes.
16.0
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
Published Date
Published date of the dataset.
2022-05-27
Time Period Data Span (start date)
Start date of the data in the dataset.
Time Period Data Span (end date)
End date of time data in the dataset.
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
Field Value
Access category
Type of access granted for the dataset (open, closed, service, etc).
public
License
License used to access the dataset.
License not specified
Limits on use
Limits on use of data.
Location
Location of the dataset.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/73b0fbd14eaf4069b26583eddb77060f
Data Service
Data service for accessing a dataset.
Owner
Owner of the dataset.
schmitzs_McMaster
Contact Point
Who to contact regarding access?
Contact Point Email
The email to contact regarding access?
Publisher
Publisher of the dataset.
Publisher Email
Email of the publisher.
Author
Author of the dataset.
schmitzs_McMaster
Author Email
Email of the author.
Accessed At
Date the data and metadata was accessed.
2022-09-23
Field Value
Identifier
Unique identifier for the dataset.
73b0fbd14eaf4069b26583eddb77060f
Language
Language(s) of the dataset
English
Link to dataset description
A URL to an external document describing the dataset.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/73b0fbd14eaf4069b26583eddb77060f
Persistent Identifier
Data is identified by a persistent identifier.
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
Contains data about individuals
Does the data hold data about individuals?
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
Contains Indigenous Data
Does the data hold data about Indigenous communities?
Portal Type
Platform type of the source portal.
Field Value
Version
Version of the datatset
None
Source
Source of the dataset.
None
Version notes
Version notes about the dataset.
Is version of another dataset
Link to dataset that it is a version of.
Other versions
Link to datasets that are versions of it.
Provenance Text
Provenance Text of the data.
Provenance URL
Provenance URL of the data.
Temporal resolution
Describes how granular the date/time data in the dataset is.
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
Field Value
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
Community Permission
Community permission (who gave permission).
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
Field Value
Number of data rows
If tabular dataset, total number of rows.
14
Number of data columns
If tabular dataset, total number of unique columns.
6
Number of data cells
If tabular dataset, total number of cells with data.
84
Number of data relations
If RDF dataset, total number of triples.
Number of entities
If RDF dataset, total number of entities.
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
Data quality
Describes the quality of the data in the dataset.
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.

0 Comments

Please login or register to comment.