Perinatal mortality, by Males, three-year average, Hamilton Health Unit

Infant and perinatal mortality, by sex, three-year average, Canada, provinces, territories, census metropolitan areas and metropolitan influence zones 1 2 3 4 5 6 7
Frequency: Occasional
Table: 13-10-0110-01 (formerly CANSIM 102-4320)
Release date: 2018-11-29
Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part, Census metropolitan influenced zone

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.

Datasets available for download

Additional Info

Field Value
Last Updated March 25, 2026, 01:50 (UTC)
Created March 25, 2026, 01:50 (UTC)
Domain / Topic
Domain or topic of the dataset being cataloged.
Title
Title for the Dataset.
Perinatal mortality, by Males, three-year average, Hamilton Health Unit
Description
A description of the dataset.

Infant and perinatal mortality, by sex, three-year average, Canada, provinces, territories, census metropolitan areas and metropolitan influence zones 1 2 3 4 5 6 7
Frequency: Occasional
Table: 13-10-0110-01 (formerly CANSIM 102-4320)
Release date: 2018-11-29
Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part, Census metropolitan influenced zone

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.
Tags / Keywords
Keywords/tags categorizing the dataset.
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
Dataset Size
Dataset size in megabytes.
16.0
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
Published Date
Published date of the dataset.
2022-03-22
Time Period Data Span (start date)
Start date of the data in the dataset.
Time Period Data Span (end date)
End date of time data in the dataset.
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
Field Value
Access category
Type of access granted for the dataset (open, closed, service, etc).
public
License
License used to access the dataset.
License not specified
Limits on use
Limits on use of data.
Location
Location of the dataset.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/c4440937b8df441ab570ec6c209d3a10
Data Service
Data service for accessing a dataset.
Owner
Owner of the dataset.
jadonvs_McMaster
Contact Point
Who to contact regarding access?
Contact Point Email
The email to contact regarding access?
Publisher
Publisher of the dataset.
Publisher Email
Email of the publisher.
Author
Author of the dataset.
jadonvs_McMaster
Author Email
Email of the author.
Accessed At
Date the data and metadata was accessed.
2022-03-22
Field Value
Identifier
Unique identifier for the dataset.
c4440937b8df441ab570ec6c209d3a10
Language
Language(s) of the dataset
English
Link to dataset description
A URL to an external document describing the dataset.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/c4440937b8df441ab570ec6c209d3a10
Persistent Identifier
Data is identified by a persistent identifier.
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
Contains data about individuals
Does the data hold data about individuals?
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
Contains Indigenous Data
Does the data hold data about Indigenous communities?
Portal Type
Platform type of the source portal.
Field Value
Version
Version of the datatset
None
Source
Source of the dataset.
None
Version notes
Version notes about the dataset.
Is version of another dataset
Link to dataset that it is a version of.
Other versions
Link to datasets that are versions of it.
Provenance Text
Provenance Text of the data.
Provenance URL
Provenance URL of the data.
Temporal resolution
Describes how granular the date/time data in the dataset is.
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
Field Value
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
Community Permission
Community permission (who gave permission).
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
Field Value
Number of data rows
If tabular dataset, total number of rows.
5
Number of data columns
If tabular dataset, total number of unique columns.
4
Number of data cells
If tabular dataset, total number of cells with data.
20
Number of data relations
If RDF dataset, total number of triples.
Number of entities
If RDF dataset, total number of entities.
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
Data quality
Describes the quality of the data in the dataset.
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.

0 Comments

Please login or register to comment.