CPTAQ inclusions and exclusions
The inclusions and exclusions come from applications for authorization submitted under the Act Respecting the Protection of Territory and Agricultural Activities (LPTAA L.R.Q., c. P-41.1) relating to the inclusion of lots in the agricultural zone or to the exclusion of lots in the agricultural zone. o The file of inclusions and exclusions represents polygons resulting from decisions of the Commission that modify the boundaries of the agricultural zone. An inclusion adds an area to the agricultural area while an exclusion removes it. The boundaries of the agricultural zone are then the result of the addition of these decisions. o The decisions are spread over time and there may be a partial or total superposition of an area resulting from an inclusion and an exclusion. In these cases, the result from the highest file number must be considered, which is the final result. · Source of inclusions and exclusions o The reference documents that served as the basis for the digitization of decisions are: the Quebec Topographic Database (BDTQ) at a scale of 1:20,000, the cadastral compilation at a scale of 1:20,000, the Cadastre of Quebec, orthophotos and various plans ·. Warning and limitations o All inclusion and exclusion files are also contained in the decision file. However, a decision leading to an inclusion or exclusion will not take effect until it is registered with the Registrar of Rights Office. Only then will the decision appear in the inclusions and exclusions file. Several months may pass between a decision and its registration. If the conditions are not met within the specified period, a decision will lapse. o With the progress of cadastral renovation, more and more territories in agricultural areas are dependent on the new cadastre. The renovated cadastre has the advantage of being more precise and better structured than the cadastral compilation. On the other hand, you should know that several decisions leading to an inclusion or an exclusion have been rendered and mapped on the cadastral compilation. Therefore, in order to limit the risks of misinterpretation, refer to the text of the decision as well as to the attached plan if necessary to validate the positioning if necessary. Purpose: To have an overview of CPTAQ decisions and to facilitate the processing of authorization applications.This third party metadata element was translated using an automated translation tool (Amazon Translate).
Datasets available for download
Additional Info
| Field | Value |
|---|---|
| Last Updated | October 20, 2025, 02:17 (UTC) |
| Created | October 20, 2025, 02:17 (UTC) |
|
Domain / Topic
Domain or topic of the dataset being cataloged.
|
Geoscientific Information |
|
Title
Title for the Dataset.
|
CPTAQ inclusions and exclusions |
|
Description
A description of the dataset.
|
The inclusions and exclusions come from applications for authorization submitted under the Act Respecting the Protection of Territory and Agricultural Activities (LPTAA L.R.Q., c. P-41.1) relating to the inclusion of lots in the agricultural zone or to the exclusion of lots in the agricultural zone. o The file of inclusions and exclusions represents polygons resulting from decisions of the Commission that modify the boundaries of the agricultural zone. An inclusion adds an area to the agricultural area while an exclusion removes it. The boundaries of the agricultural zone are then the result of the addition of these decisions. o The decisions are spread over time and there may be a partial or total superposition of an area resulting from an inclusion and an exclusion. In these cases, the result from the highest file number must be considered, which is the final result. · Source of inclusions and exclusions o The reference documents that served as the basis for the digitization of decisions are: the Quebec Topographic Database (BDTQ) at a scale of 1:20,000, the cadastral compilation at a scale of 1:20,000, the Cadastre of Quebec, orthophotos and various plans ·. Warning and limitations o All inclusion and exclusion files are also contained in the decision file. However, a decision leading to an inclusion or exclusion will not take effect until it is registered with the Registrar of Rights Office. Only then will the decision appear in the inclusions and exclusions file. Several months may pass between a decision and its registration. If the conditions are not met within the specified period, a decision will lapse. o With the progress of cadastral renovation, more and more territories in agricultural areas are dependent on the new cadastre. The renovated cadastre has the advantage of being more precise and better structured than the cadastral compilation. On the other hand, you should know that several decisions leading to an inclusion or an exclusion have been rendered and mapped on the cadastral compilation. Therefore, in order to limit the risks of misinterpretation, refer to the text of the decision as well as to the attached plan if necessary to validate the positioning if necessary. Purpose: To have an overview of CPTAQ decisions and to facilitate the processing of authorization applications.This third party metadata element was translated using an automated translation tool (Amazon Translate). |
|
Tags / Keywords
Keywords/tags categorizing the dataset.
|
|
|
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
|
|
|
Dataset Size
Dataset size in megabytes.
|
|
|
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
|
|
|
Published Date
Published date of the dataset.
|
2012-06-26 |
|
Time Period Data Span (start date)
Start date of the data in the dataset.
|
|
|
Time Period Data Span (end date)
End date of time data in the dataset.
|
|
|
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
|
| Field | Value |
|---|---|
|
Access category
Type of access granted for the dataset (open, closed, service, etc).
|
|
|
License
License used to access the dataset.
|
Creative Commons 4.0 Attribution (CC-BY) licence – Quebec |
|
Limits on use
Limits on use of data.
|
|
|
Location
Location of the dataset.
|
https://open.canada.ca/data/en/dataset/69a93783-00a4-4b6b-b57e-c23567f8d9d6 |
|
Data Service
Data service for accessing a dataset.
|
|
|
Owner
Owner of the dataset.
|
Government and Municipalities of Québec | Gouvernement et municipalités du Québec |
|
Contact Point
Who to contact regarding access?
|
Government and Municipalities of Québec; Government and Municipalities of Québec; Commission de protection du territoire agricole, [email protected] |
|
Contact Point Email
The email to contact regarding access?
|
|
|
Publisher
Publisher of the dataset.
|
|
|
Publisher Email
Email of the publisher.
|
[email protected] |
|
Author
Author of the dataset.
|
|
|
Author Email
Email of the author.
|
|
|
Accessed At
Date the data and metadata was accessed.
|
| Field | Value |
|---|---|
|
Identifier
Unique identifier for the dataset.
|
|
|
Language
Language(s) of the dataset
|
|
|
Link to dataset description
A URL to an external document describing the dataset.
|
|
|
Persistent Identifier
Data is identified by a persistent identifier.
|
|
|
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
|
|
|
Contains data about individuals
Does the data hold data about individuals?
|
|
|
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
|
|
|
Contains Indigenous Data
Does the data hold data about Indigenous communities?
|
|
|
Portal Type
Platform type of the source portal.
|
| Field | Value |
|---|---|
|
Version
Version of the datatset
|
None |
|
Source
Source of the dataset.
|
None |
|
Version notes
Version notes about the dataset.
|
|
|
Is version of another dataset
Link to dataset that it is a version of.
|
|
|
Other versions
Link to datasets that are versions of it.
|
|
|
Provenance Text
Provenance Text of the data.
|
|
|
Provenance URL
Provenance URL of the data.
|
|
|
Temporal resolution
Describes how granular the date/time data in the dataset is.
|
|
|
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
|
|
|
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
|
| Field | Value |
|---|---|
|
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
|
|
|
Community Permission
Community permission (who gave permission).
|
|
|
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
|
| Field | Value |
|---|---|
|
Number of data rows
If tabular dataset, total number of rows.
|
|
|
Number of data columns
If tabular dataset, total number of unique columns.
|
|
|
Number of data cells
If tabular dataset, total number of cells with data.
|
|
|
Number of data relations
If RDF dataset, total number of triples.
|
|
|
Number of entities
If RDF dataset, total number of entities.
|
|
|
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
|
|
|
Data quality
Describes the quality of the data in the dataset.
|
|
|
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.
|
0 Comments