Analysis of geoscience data for geothermal exploration in the Dakwäkäda (Haines Junction) area, Yukon
In collaboration with the Yukon Geological Survey, the Geological Survey of Canada, and other project partners, Innovate Geothermal Ltd. performed an analysis of geoscience data in southwestern Yukon as part of an effort to better understand the potential for geothermal energy resources that, if present, could be utilized to help reduce fossil fuel use. The study area for this project is located in the vicinity of the Village of Haines Junction (Dakwäkäda) and lies between the Denali and Shakwak fault zones. The main aim of this project is to analyze and interpret a variety of pre-existing and newly acquired geological and geophysical datasets to evaluate where geothermal reservoirs may be present within the study area. A secondary aim is to propose favourable drilling locations, if warranted, for exploratory wells to collect information on subsurface temperature and permeability. The geoscience work accomplished here includes both 2D map interpretation as well as construction of a 3D geologic model that was guided by geophysical inversion modelling of gravity, magnetic and audio-magnetotelluric survey data. At a regional scale, multiple lines of evidence suggest that subsurface temperatures are above the crustal average. More importantly, a municipal water well drilled in 2002 in the Village of Haines Junction produce warm (~20 °C) water from a depth of ~350 m. This water well proves that at least one permeable sediment-hosted geothermal aquifer is present under Haines Junction. Additional geothermal aquifers within the pile of young sediment that sits atop the bedrock are likely present. However, due to a lack of deep drilling in the area, the exact location, temperature, thickness and permeability of such aquifers remains unknown. In this study, a depth-to-bedrock model has been generated to aid with the identification of favourable target areas for exploratory drilling of geothermal wells. The four areas where the top-of-bedrock is deepest have estimated depths in the range 650 to 1225 m below ground surface. Temperature data from two wells in the Haines Junction area suggests the temperature gradient is ~60 °C/km. Thus, geothermal aquifers located near the top-of-bedrock in the four areas identified could have temperatures in the range of 39–74 °C. Production of geothermal fluids from these areas requires permeability in the sediments that sit above the bedrock. Deeper drilling is needed to measure actual subsurface temperatures beneath the village and to identify permeable intervals. Geologic structures and faults that may control permeability in the bedrock remain poorly constrained.
Datasets available for download
Additional Info
| Field | Value |
|---|---|
| Last Updated | October 20, 2025, 02:23 (UTC) |
| Created | October 20, 2025, 02:23 (UTC) |
|
Domain / Topic
Domain or topic of the dataset being cataloged.
|
|
|
Title
Title for the Dataset.
|
Analysis of geoscience data for geothermal exploration in the Dakwäkäda (Haines Junction) area, Yukon |
|
Description
A description of the dataset.
|
In collaboration with the Yukon Geological Survey, the Geological Survey of Canada, and other project partners, Innovate Geothermal Ltd. performed an analysis of geoscience data in southwestern Yukon as part of an effort to better understand the potential for geothermal energy resources that, if present, could be utilized to help reduce fossil fuel use. The study area for this project is located in the vicinity of the Village of Haines Junction (Dakwäkäda) and lies between the Denali and Shakwak fault zones. The main aim of this project is to analyze and interpret a variety of pre-existing and newly acquired geological and geophysical datasets to evaluate where geothermal reservoirs may be present within the study area. A secondary aim is to propose favourable drilling locations, if warranted, for exploratory wells to collect information on subsurface temperature and permeability. The geoscience work accomplished here includes both 2D map interpretation as well as construction of a 3D geologic model that was guided by geophysical inversion modelling of gravity, magnetic and audio-magnetotelluric survey data. At a regional scale, multiple lines of evidence suggest that subsurface temperatures are above the crustal average. More importantly, a municipal water well drilled in 2002 in the Village of Haines Junction produce warm (~20 °C) water from a depth of ~350 m. This water well proves that at least one permeable sediment-hosted geothermal aquifer is present under Haines Junction. Additional geothermal aquifers within the pile of young sediment that sits atop the bedrock are likely present. However, due to a lack of deep drilling in the area, the exact location, temperature, thickness and permeability of such aquifers remains unknown. In this study, a depth-to-bedrock model has been generated to aid with the identification of favourable target areas for exploratory drilling of geothermal wells. The four areas where the top-of-bedrock is deepest have estimated depths in the range 650 to 1225 m below ground surface. Temperature data from two wells in the Haines Junction area suggests the temperature gradient is ~60 °C/km. Thus, geothermal aquifers located near the top-of-bedrock in the four areas identified could have temperatures in the range of 39–74 °C. Production of geothermal fluids from these areas requires permeability in the sediments that sit above the bedrock. Deeper drilling is needed to measure actual subsurface temperatures beneath the village and to identify permeable intervals. Geologic structures and faults that may control permeability in the bedrock remain poorly constrained. |
|
Tags / Keywords
Keywords/tags categorizing the dataset.
|
|
|
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
|
|
|
Dataset Size
Dataset size in megabytes.
|
|
|
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
|
|
|
Published Date
Published date of the dataset.
|
2024-07-15 |
|
Time Period Data Span (start date)
Start date of the data in the dataset.
|
|
|
Time Period Data Span (end date)
End date of time data in the dataset.
|
|
|
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
|
| Field | Value |
|---|---|
|
Access category
Type of access granted for the dataset (open, closed, service, etc).
|
|
|
License
License used to access the dataset.
|
Open Government Licence - Yukon |
|
Limits on use
Limits on use of data.
|
|
|
Location
Location of the dataset.
|
https://open.canada.ca/data/en/dataset/405b9293-3879-44c6-abeb-41d25d57fda1 |
|
Data Service
Data service for accessing a dataset.
|
|
|
Owner
Owner of the dataset.
|
Government of Yukon | Gouvernement du Yukon |
|
Contact Point
Who to contact regarding access?
|
Yukon Geological Survey |
|
Contact Point Email
The email to contact regarding access?
|
|
|
Publisher
Publisher of the dataset.
|
|
|
Publisher Email
Email of the publisher.
|
[email protected] |
|
Author
Author of the dataset.
|
|
|
Author Email
Email of the author.
|
|
|
Accessed At
Date the data and metadata was accessed.
|
| Field | Value |
|---|---|
|
Identifier
Unique identifier for the dataset.
|
|
|
Language
Language(s) of the dataset
|
|
|
Link to dataset description
A URL to an external document describing the dataset.
|
|
|
Persistent Identifier
Data is identified by a persistent identifier.
|
|
|
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
|
|
|
Contains data about individuals
Does the data hold data about individuals?
|
|
|
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
|
|
|
Contains Indigenous Data
Does the data hold data about Indigenous communities?
|
|
|
Portal Type
Platform type of the source portal.
|
| Field | Value |
|---|---|
|
Version
Version of the datatset
|
None |
|
Source
Source of the dataset.
|
None |
|
Version notes
Version notes about the dataset.
|
|
|
Is version of another dataset
Link to dataset that it is a version of.
|
|
|
Other versions
Link to datasets that are versions of it.
|
|
|
Provenance Text
Provenance Text of the data.
|
|
|
Provenance URL
Provenance URL of the data.
|
|
|
Temporal resolution
Describes how granular the date/time data in the dataset is.
|
|
|
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
|
|
|
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
|
| Field | Value |
|---|---|
|
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
|
|
|
Community Permission
Community permission (who gave permission).
|
|
|
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
|
| Field | Value |
|---|---|
|
Number of data rows
If tabular dataset, total number of rows.
|
|
|
Number of data columns
If tabular dataset, total number of unique columns.
|
|
|
Number of data cells
If tabular dataset, total number of cells with data.
|
|
|
Number of data relations
If RDF dataset, total number of triples.
|
|
|
Number of entities
If RDF dataset, total number of entities.
|
|
|
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
|
|
|
Data quality
Describes the quality of the data in the dataset.
|
|
|
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.
|
0 Comments