Early-stage exploration for geothermal energy resources along the Denali fault near Duke River, Yukon
In collaboration with the Yukon Geological Survey, Innovate Geothermal Ltd. performed a multi-component geoscientific investigation in southwestern Yukon to initiate the search for subsurface geothermal energy resources that could be used for direct use applications and, possibly, the generation of electricity. The study area for this project is located near the community of Burwash Landing and straddles the eastern Denali fault zone. The aim of this project is to analyze and interpret a variety of pre-existing and newly-acquired geological and geophysical data sets to identify favourable subsurface targets for a shallow, exploratory geothermal drilling program that could take place in the future. The geoscience work accomplished here includes both 2D map interpretation as well as construction of a 3D geologic model that was tested by geophysical inversion modelling of gravity and magnetic survey data. In addition, a literature review was conducted to identify analogous geothermal structural environments located in similar crustal-scale transform fault zones for comparison with geothermal systems that may be present in the vicinity of the Denali fault. Importantly, geophysical data from this study discovered a right-step in the Denali fault that has the appropriate orientation to form a small pull-apart zone in the Earth’s crust within the project area south of Duke River. Such crustal extension may generate fractures and permeability in rocks in the subsurface. Subsurface permeability in geothermal systems provides the pathway for hot geothermal fluids to ascend to drillable depths. This study has identified seven drilling targets, all located in the vicinity of the previously mentioned right-step in the Denali fault. The 3D geologic model generated for this study was utilized to help understand the lithologic domains and structures likely to be encountered by the proposed exploratory boreholes. The distribution of temperature in the subsurface, however, remains a significant unknown. Regional-scale, Curie point depth estimates suggest an average geothermal gradient of ~40°C/km near the eastern Denali fault, but drilling is required to measure actual subsurface temperatures. Based upon the encouraging results of this study, it is recommended that at least two of the seven targets are drilled to depths of 500–1000 m to obtain data on subsurface temperatures, fluids and geology.
Datasets available for download
Additional Info
| Field | Value |
|---|---|
| Last Updated | October 20, 2025, 02:23 (UTC) |
| Created | October 20, 2025, 02:23 (UTC) |
|
Domain / Topic
Domain or topic of the dataset being cataloged.
|
|
|
Title
Title for the Dataset.
|
Early-stage exploration for geothermal energy resources along the Denali fault near Duke River, Yukon |
|
Description
A description of the dataset.
|
In collaboration with the Yukon Geological Survey, Innovate Geothermal Ltd. performed a multi-component geoscientific investigation in southwestern Yukon to initiate the search for subsurface geothermal energy resources that could be used for direct use applications and, possibly, the generation of electricity. The study area for this project is located near the community of Burwash Landing and straddles the eastern Denali fault zone. The aim of this project is to analyze and interpret a variety of pre-existing and newly-acquired geological and geophysical data sets to identify favourable subsurface targets for a shallow, exploratory geothermal drilling program that could take place in the future. The geoscience work accomplished here includes both 2D map interpretation as well as construction of a 3D geologic model that was tested by geophysical inversion modelling of gravity and magnetic survey data. In addition, a literature review was conducted to identify analogous geothermal structural environments located in similar crustal-scale transform fault zones for comparison with geothermal systems that may be present in the vicinity of the Denali fault. Importantly, geophysical data from this study discovered a right-step in the Denali fault that has the appropriate orientation to form a small pull-apart zone in the Earth’s crust within the project area south of Duke River. Such crustal extension may generate fractures and permeability in rocks in the subsurface. Subsurface permeability in geothermal systems provides the pathway for hot geothermal fluids to ascend to drillable depths. This study has identified seven drilling targets, all located in the vicinity of the previously mentioned right-step in the Denali fault. The 3D geologic model generated for this study was utilized to help understand the lithologic domains and structures likely to be encountered by the proposed exploratory boreholes. The distribution of temperature in the subsurface, however, remains a significant unknown. Regional-scale, Curie point depth estimates suggest an average geothermal gradient of ~40°C/km near the eastern Denali fault, but drilling is required to measure actual subsurface temperatures. Based upon the encouraging results of this study, it is recommended that at least two of the seven targets are drilled to depths of 500–1000 m to obtain data on subsurface temperatures, fluids and geology. |
|
Tags / Keywords
Keywords/tags categorizing the dataset.
|
|
|
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
|
|
|
Dataset Size
Dataset size in megabytes.
|
|
|
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
|
|
|
Published Date
Published date of the dataset.
|
2020-05-28 |
|
Time Period Data Span (start date)
Start date of the data in the dataset.
|
|
|
Time Period Data Span (end date)
End date of time data in the dataset.
|
|
|
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
|
| Field | Value |
|---|---|
|
Access category
Type of access granted for the dataset (open, closed, service, etc).
|
|
|
License
License used to access the dataset.
|
Open Government Licence - Yukon |
|
Limits on use
Limits on use of data.
|
|
|
Location
Location of the dataset.
|
https://open.canada.ca/data/en/dataset/3ce62b16-c328-4418-8c45-34491a6dba90 |
|
Data Service
Data service for accessing a dataset.
|
|
|
Owner
Owner of the dataset.
|
Government of Yukon | Gouvernement du Yukon |
|
Contact Point
Who to contact regarding access?
|
Yukon Geological Survey |
|
Contact Point Email
The email to contact regarding access?
|
|
|
Publisher
Publisher of the dataset.
|
|
|
Publisher Email
Email of the publisher.
|
[email protected] |
|
Author
Author of the dataset.
|
|
|
Author Email
Email of the author.
|
|
|
Accessed At
Date the data and metadata was accessed.
|
| Field | Value |
|---|---|
|
Identifier
Unique identifier for the dataset.
|
|
|
Language
Language(s) of the dataset
|
|
|
Link to dataset description
A URL to an external document describing the dataset.
|
|
|
Persistent Identifier
Data is identified by a persistent identifier.
|
|
|
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
|
|
|
Contains data about individuals
Does the data hold data about individuals?
|
|
|
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
|
|
|
Contains Indigenous Data
Does the data hold data about Indigenous communities?
|
|
|
Portal Type
Platform type of the source portal.
|
| Field | Value |
|---|---|
|
Version
Version of the datatset
|
None |
|
Source
Source of the dataset.
|
None |
|
Version notes
Version notes about the dataset.
|
|
|
Is version of another dataset
Link to dataset that it is a version of.
|
|
|
Other versions
Link to datasets that are versions of it.
|
|
|
Provenance Text
Provenance Text of the data.
|
|
|
Provenance URL
Provenance URL of the data.
|
|
|
Temporal resolution
Describes how granular the date/time data in the dataset is.
|
|
|
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
|
|
|
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
|
| Field | Value |
|---|---|
|
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
|
|
|
Community Permission
Community permission (who gave permission).
|
|
|
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
|
| Field | Value |
|---|---|
|
Number of data rows
If tabular dataset, total number of rows.
|
|
|
Number of data columns
If tabular dataset, total number of unique columns.
|
|
|
Number of data cells
If tabular dataset, total number of cells with data.
|
|
|
Number of data relations
If RDF dataset, total number of triples.
|
|
|
Number of entities
If RDF dataset, total number of entities.
|
|
|
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
|
|
|
Data quality
Describes the quality of the data in the dataset.
|
|
|
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.
|
0 Comments