Geological Mapping in the Campbell Range, Southeastern Yukon (Parts of 105 G/8, G/9 and 105 H/5, H/12)
The Finlayson Lake fault zone forms the boundary between autochthonous North American rocks and rocks of the innermost accreted Slide Mountain and Yukon-Tanana terranes in southeastern Yukon. Geological mapping at 1::50 000 scale in a well exposed area of the Campbell Range, southeastern Yukon, was undertaken to examine the kinematics of the Finlayson Lake fault zone and rock types of the Slide Mountain terrane.
Five units were identified: (1) chloritic schist and phyllite, (2) laminated metachert and carbonaceous black slate, (3) tan weathering metachert and maroon siliceous and argillaceous metasiltstone, (4) greenstone and associated breccia, gabbro, metagreywacke, metachert and maroon metasiltstone and (5) serpentinite. Unit 2 is structurally interleaved with submap-scale bodies or layers of serpentinite, hornblende-plagioclase porphyry, plagioclase-potassium fledspar porphyry, quartz-eye muscovite-chlorite phyllite or schist, chloritic schist and minor grey, calcareous metacarbonate. Serpentinite is also exposed in unit 4 and as small slivers along the thrust contact between units 3 and 4.
Lithologically, units 4 and 5 are similar to the upper division of the Slide Mountain terrane in east-central and north-central British Columbia. Unit 2 has similarities with the lowest division of the Sylvester allochthon and is tentatively correlated with the Slide Mountain terrane. Maroon metasiltstone in unit 3 is indistinguishable lithologically from metasiltstone in the overlying greenstone unit suggesting that the eastern thrust fault juxxtaposes parts of the same depositional sequence, ie. The Slide Mountain terrane. Regional correlation of unit 1 is unclear.
Unit 2 is inferred to be bounded to the east and west by northwest-striking faults and to the south, by an east-striking, steeply dipping, normal (north-side down) fault. The northern boundary of unit 2 is unconstrained. Greenstone (unit 4) is thrust towards the southwest over unit 1 in the western part of the map area along a northwest-striking, gently northeast-dipping thrust fault. In the eastern part of the map area, greenstone is thrust towards the northeast over unit 3 along a northwest-striking, moderately southwest-dipping thrust fault. Outcrop data and topographic patterns suggest that the eastern thrust fault is truncated by a northwest-striking, steeply dipping fault and that the normal fault truncates the westernmost northwest-striking fault. The northwest-striking faults are poorly exposed and their kinematics have yet to be determined. However, if they are steep faults, they are likely dextral strike-slip faults.
Field data indicate that the Finlayson Lake fault zone consists of diverging thrust faults and subparallel strike-slip(?) faults. These structures are consistent with the interpretation of the Finlayson Lake fault zone as a transpressive fault zone. More constraints on the relative timing of faulting and the kinematics of the steep faults are required to test this hypothesis,
Datasets available for download
Additional Info
| Field | Value |
|---|---|
| Last Updated | October 20, 2025, 02:24 (UTC) |
| Created | October 20, 2025, 02:24 (UTC) |
|
Domain / Topic
Domain or topic of the dataset being cataloged.
|
|
|
Title
Title for the Dataset.
|
Geological Mapping in the Campbell Range, Southeastern Yukon (Parts of 105 G/8, G/9 and 105 H/5, H/12) |
|
Description
A description of the dataset.
|
The Finlayson Lake fault zone forms the boundary between autochthonous North American rocks and rocks of the innermost accreted Slide Mountain and Yukon-Tanana terranes in southeastern Yukon. Geological mapping at 1::50 000 scale in a well exposed area of the Campbell Range, southeastern Yukon, was undertaken to examine the kinematics of the Finlayson Lake fault zone and rock types of the Slide Mountain terrane. Five units were identified: (1) chloritic schist and phyllite, (2) laminated metachert and carbonaceous black slate, (3) tan weathering metachert and maroon siliceous and argillaceous metasiltstone, (4) greenstone and associated breccia, gabbro, metagreywacke, metachert and maroon metasiltstone and (5) serpentinite. Unit 2 is structurally interleaved with submap-scale bodies or layers of serpentinite, hornblende-plagioclase porphyry, plagioclase-potassium fledspar porphyry, quartz-eye muscovite-chlorite phyllite or schist, chloritic schist and minor grey, calcareous metacarbonate. Serpentinite is also exposed in unit 4 and as small slivers along the thrust contact between units 3 and 4. Lithologically, units 4 and 5 are similar to the upper division of the Slide Mountain terrane in east-central and north-central British Columbia. Unit 2 has similarities with the lowest division of the Sylvester allochthon and is tentatively correlated with the Slide Mountain terrane. Maroon metasiltstone in unit 3 is indistinguishable lithologically from metasiltstone in the overlying greenstone unit suggesting that the eastern thrust fault juxxtaposes parts of the same depositional sequence, ie. The Slide Mountain terrane. Regional correlation of unit 1 is unclear. Unit 2 is inferred to be bounded to the east and west by northwest-striking faults and to the south, by an east-striking, steeply dipping, normal (north-side down) fault. The northern boundary of unit 2 is unconstrained. Greenstone (unit 4) is thrust towards the southwest over unit 1 in the western part of the map area along a northwest-striking, gently northeast-dipping thrust fault. In the eastern part of the map area, greenstone is thrust towards the northeast over unit 3 along a northwest-striking, moderately southwest-dipping thrust fault. Outcrop data and topographic patterns suggest that the eastern thrust fault is truncated by a northwest-striking, steeply dipping fault and that the normal fault truncates the westernmost northwest-striking fault. The northwest-striking faults are poorly exposed and their kinematics have yet to be determined. However, if they are steep faults, they are likely dextral strike-slip faults. Field data indicate that the Finlayson Lake fault zone consists of diverging thrust faults and subparallel strike-slip(?) faults. These structures are consistent with the interpretation of the Finlayson Lake fault zone as a transpressive fault zone. More constraints on the relative timing of faulting and the kinematics of the steep faults are required to test this hypothesis, |
|
Tags / Keywords
Keywords/tags categorizing the dataset.
|
|
|
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
|
|
|
Dataset Size
Dataset size in megabytes.
|
|
|
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
|
|
|
Published Date
Published date of the dataset.
|
2011-04-04 |
|
Time Period Data Span (start date)
Start date of the data in the dataset.
|
|
|
Time Period Data Span (end date)
End date of time data in the dataset.
|
|
|
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
|
| Field | Value |
|---|---|
|
Access category
Type of access granted for the dataset (open, closed, service, etc).
|
|
|
License
License used to access the dataset.
|
Open Government Licence - Yukon |
|
Limits on use
Limits on use of data.
|
|
|
Location
Location of the dataset.
|
https://open.canada.ca/data/en/dataset/0f7e2122-606a-48b0-a108-b34fa80bb5c2 |
|
Data Service
Data service for accessing a dataset.
|
|
|
Owner
Owner of the dataset.
|
Government of Yukon | Gouvernement du Yukon |
|
Contact Point
Who to contact regarding access?
|
Yukon Geological Survey |
|
Contact Point Email
The email to contact regarding access?
|
|
|
Publisher
Publisher of the dataset.
|
|
|
Publisher Email
Email of the publisher.
|
[email protected] |
|
Author
Author of the dataset.
|
|
|
Author Email
Email of the author.
|
|
|
Accessed At
Date the data and metadata was accessed.
|
| Field | Value |
|---|---|
|
Identifier
Unique identifier for the dataset.
|
|
|
Language
Language(s) of the dataset
|
|
|
Link to dataset description
A URL to an external document describing the dataset.
|
|
|
Persistent Identifier
Data is identified by a persistent identifier.
|
|
|
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
|
|
|
Contains data about individuals
Does the data hold data about individuals?
|
|
|
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
|
|
|
Contains Indigenous Data
Does the data hold data about Indigenous communities?
|
|
|
Portal Type
Platform type of the source portal.
|
| Field | Value |
|---|---|
|
Version
Version of the datatset
|
None |
|
Source
Source of the dataset.
|
None |
|
Version notes
Version notes about the dataset.
|
|
|
Is version of another dataset
Link to dataset that it is a version of.
|
|
|
Other versions
Link to datasets that are versions of it.
|
|
|
Provenance Text
Provenance Text of the data.
|
|
|
Provenance URL
Provenance URL of the data.
|
|
|
Temporal resolution
Describes how granular the date/time data in the dataset is.
|
|
|
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
|
|
|
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
|
| Field | Value |
|---|---|
|
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
|
|
|
Community Permission
Community permission (who gave permission).
|
|
|
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
|
| Field | Value |
|---|---|
|
Number of data rows
If tabular dataset, total number of rows.
|
|
|
Number of data columns
If tabular dataset, total number of unique columns.
|
|
|
Number of data cells
If tabular dataset, total number of cells with data.
|
|
|
Number of data relations
If RDF dataset, total number of triples.
|
|
|
Number of entities
If RDF dataset, total number of entities.
|
|
|
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
|
|
|
Data quality
Describes the quality of the data in the dataset.
|
|
|
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.
|
0 Comments