Sentinel-2 10m Land Use/Land Cover Time Series

Global imagery layer optimized for analysis. Sentinel-2 10m land use/land cover time series of the world. Produced by Impact Observatory and Esri.

This layer displays a global map of land use/land cover (LULC) derived from ESA Sentinel-2 imagery at 10m resolution. Each year is generated with Impact Observatory’s deep learning AI land classification model, trained using billions of human-labeled image pixels from the National Geographic Society. The global maps are produced by applying this model to the Sentinel-2 Level-2A image collection on Microsoft’s Planetary Computer, processing over 400,000 Earth observations per year.

The algorithm generates LULC predictions for nine classes, described in detail below.  

The year 2017 has a land cover class assigned for every pixel, but its class is based upon fewer images than the other years. The years 2018-2024 are based upon a more complete set of imagery. For this reason, the year 2017 may have less accurate land cover class assignments than the years 2018-2024.
 

Key Properties 

  Variable mapped: Land use/land cover in 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Source Data Coordinate System: Universal Transverse Mercator (UTM) WGS84
Service Coordinate System: Web Mercator Auxiliary Sphere WGS84 (EPSG:3857)
Extent: Global
Source imagery: Sentinel-2 L2A
Cell Size: 10-meters
Type: Thematic
Attribution: Esri, Impact Observatory Analysis: Optimized for analysis Class Definitions: 
  ValueNameDescription1WaterAreas where water was predominantly present throughout the year; may not cover areas with sporadic or ephemeral water; contains little to no sparse vegetation, no rock outcrop nor built up features like docks; examples: rivers, ponds, lakes, oceans, flooded salt plains.2TreesAny significant clustering of tall (~15 feet or higher) dense vegetation, typically with a closed or dense canopy; examples: wooded vegetation,  clusters of dense tall vegetation within savannas, plantations, swamp or mangroves (dense/tall vegetation with ephemeral water or canopy too thick to detect water underneath).4Flooded vegetationAreas of any type of vegetation with obvious intermixing of water throughout a majority of the year; seasonally flooded area that is a mix of grass/shrub/trees/bare ground; examples: flooded mangroves, emergent vegetation, rice paddies and other heavily irrigated and inundated agriculture.5CropsHuman planted/plotted cereals, grasses, and crops not at tree height; examples: corn, wheat, soy, fallow plots of structured land.7Built AreaHuman made structures; major road and rail networks; large homogenous impervious surfaces including parking structures, office buildings and residential housing; examples: houses, dense villages / towns / cities, paved roads, asphalt.8Bare groundAreas of rock or soil with very sparse to no vegetation for the entire year; large areas of sand and deserts with no to little vegetation; examples: exposed rock or soil, desert and sand dunes, dry salt flats/pans, dried lake beds, mines.9Snow/IceLarge homogenous areas of permanent snow or ice, typically only in mountain areas or highest latitudes; examples: glaciers, permanent snowpack, snow fields.10CloudsNo land cover information due to persistent cloud cover.11RangelandOpen areas covered in homogenous grasses with little to no taller vegetation; wild cereals and grasses with no obvious human plotting (i.e., not a plotted field); examples: natural meadows and fields with sparse to no tree cover, open savanna with few to no trees, parks/golf courses/lawns, pastures. Mix of small clusters of plants or single plants dispersed on a landscape that shows exposed soil or rock; scrub-filled clearings within dense forests that are clearly not taller than trees; examples: moderate to sparse cover of bushes, shrubs and tufts of grass, savannas with very sparse grasses, trees or other plants.

NOTE: Land use focus does not provide the spatial detail of a land cover map. As such, for the built area classification, yards, parks, and groves will appear as built area rather than trees or rangeland classes.


Usage Information and Best Practices

Processing Templates
  • This layer includes a number of preconfigured processing templates (raster function templates) to provide on-the-fly data rendering and class isolation for visualization and analysis. 
  • Each processing template includes labels and descriptions to characterize the intended usage. This may include for visualization, for analysis, or for both visualization and analysis.

 

Visualization

  • The default rendering on this layer displays all classes.
  • There are a number of on-the-fly renderings/processing templates designed specifically for data visualization.
  • By default, the most recent year is displayed. To discover and isolate specific years for visualization in Map Viewer, try using the Image Collection Explorer.

 

Analysis

  • In order to leverage the optimization for analysis, the capability must be enabled by your ArcGIS organization administrator. More information on enabling this feature can be found in the ‘Regional data hosting’ section of this help doc.
  • Optimized for analysis means this layer does not have size constraints for analysis and it is recommended for multisource analysis with other layers optimized for analysis. See this group for a complete list of imagery layers optimized for analysis.
  • Prior to running analysis, users should always provide some form of data selection with either a layer filter (e.g. for a specific date range, cloud cover percent, mission, etc.) or by selecting specific images. To discover and isolate specific images for analysis in Map Viewer, try using the Image Collection Explorer.
  • Zonal Statistics is a common tool used for understanding the composition of a specified area by reporting the total estimates for each of the classes. 

 

General

  • If you are new to Sentinel-2 LULC, the Sentinel-2 Land Cover Explorer provides a good introductory user experience for working with this imagery layer. For more information, see this Quick Start Guide.
  • Global land use/land cover maps provide information on conservation planning, food security, and hydrologic modeling, among other things. This dataset can be used to visualize land use/land cover anywhere on Earth.

 

Classification Process

These maps include Version 003 of the global Sentinel-2 land use/land cover data product. It is produced by a deep learning model trained using over five billion hand-labeled Sentinel-2 pixels, sampled from over 20,000 sites distributed across all major biomes of the world.

The underlying deep learning model uses 6-bands of Sentinel-2 L2A surface reflectance data: visible blue, green, red, near infrared, and two shortwave infrared bands. To create the final map, the model is run on multiple dates of imagery throughout the year, and the outputs are composited into a final representative map for each year.

The input Sentinel-2 L2A data was accessed via Microsoft’s Planetary Computer and scaled using Microsoft Azure Batch.

 
Citation
Karra, Kontgis, et al. “Global land use/land cover with Sentinel-2 and deep learning.” IGARSS 2021-2021 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2021.

Acknowledgements

Training data for this project makes use of the National Geographic Society Dynamic World training dataset, produced for the Dynamic World Project by National Geographic Society in partnership with Google and the World Resources Institute.

Datasets available for download

Additional Info

Field Value
Last Updated March 24, 2026, 21:07 (UTC)
Created March 24, 2026, 21:07 (UTC)
Domain / Topic
Domain or topic of the dataset being cataloged.
Title
Title for the Dataset.
Sentinel-2 10m Land Use/Land Cover Time Series
Description
A description of the dataset.

Global imagery layer optimized for analysis. Sentinel-2 10m land use/land cover time series of the world. Produced by Impact Observatory and Esri.

This layer displays a global map of land use/land cover (LULC) derived from ESA Sentinel-2 imagery at 10m resolution. Each year is generated with Impact Observatory’s deep learning AI land classification model, trained using billions of human-labeled image pixels from the National Geographic Society. The global maps are produced by applying this model to the Sentinel-2 Level-2A image collection on Microsoft’s Planetary Computer, processing over 400,000 Earth observations per year.

The algorithm generates LULC predictions for nine classes, described in detail below.  

The year 2017 has a land cover class assigned for every pixel, but its class is based upon fewer images than the other years. The years 2018-2024 are based upon a more complete set of imagery. For this reason, the year 2017 may have less accurate land cover class assignments than the years 2018-2024.
 

Key Properties 

  Variable mapped: Land use/land cover in 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Source Data Coordinate System: Universal Transverse Mercator (UTM) WGS84
Service Coordinate System: Web Mercator Auxiliary Sphere WGS84 (EPSG:3857)
Extent: Global
Source imagery: Sentinel-2 L2A
Cell Size: 10-meters
Type: Thematic
Attribution: Esri, Impact Observatory Analysis: Optimized for analysis Class Definitions: 
  ValueNameDescription1WaterAreas where water was predominantly present throughout the year; may not cover areas with sporadic or ephemeral water; contains little to no sparse vegetation, no rock outcrop nor built up features like docks; examples: rivers, ponds, lakes, oceans, flooded salt plains.2TreesAny significant clustering of tall (~15 feet or higher) dense vegetation, typically with a closed or dense canopy; examples: wooded vegetation,  clusters of dense tall vegetation within savannas, plantations, swamp or mangroves (dense/tall vegetation with ephemeral water or canopy too thick to detect water underneath).4Flooded vegetationAreas of any type of vegetation with obvious intermixing of water throughout a majority of the year; seasonally flooded area that is a mix of grass/shrub/trees/bare ground; examples: flooded mangroves, emergent vegetation, rice paddies and other heavily irrigated and inundated agriculture.5CropsHuman planted/plotted cereals, grasses, and crops not at tree height; examples: corn, wheat, soy, fallow plots of structured land.7Built AreaHuman made structures; major road and rail networks; large homogenous impervious surfaces including parking structures, office buildings and residential housing; examples: houses, dense villages / towns / cities, paved roads, asphalt.8Bare groundAreas of rock or soil with very sparse to no vegetation for the entire year; large areas of sand and deserts with no to little vegetation; examples: exposed rock or soil, desert and sand dunes, dry salt flats/pans, dried lake beds, mines.9Snow/IceLarge homogenous areas of permanent snow or ice, typically only in mountain areas or highest latitudes; examples: glaciers, permanent snowpack, snow fields.10CloudsNo land cover information due to persistent cloud cover.11RangelandOpen areas covered in homogenous grasses with little to no taller vegetation; wild cereals and grasses with no obvious human plotting (i.e., not a plotted field); examples: natural meadows and fields with sparse to no tree cover, open savanna with few to no trees, parks/golf courses/lawns, pastures. Mix of small clusters of plants or single plants dispersed on a landscape that shows exposed soil or rock; scrub-filled clearings within dense forests that are clearly not taller than trees; examples: moderate to sparse cover of bushes, shrubs and tufts of grass, savannas with very sparse grasses, trees or other plants.

NOTE: Land use focus does not provide the spatial detail of a land cover map. As such, for the built area classification, yards, parks, and groves will appear as built area rather than trees or rangeland classes.


Usage Information and Best Practices

Processing Templates
  • This layer includes a number of preconfigured processing templates (raster function templates) to provide on-the-fly data rendering and class isolation for visualization and analysis. 
  • Each processing template includes labels and descriptions to characterize the intended usage. This may include for visualization, for analysis, or for both visualization and analysis.

 

Visualization

  • The default rendering on this layer displays all classes.
  • There are a number of on-the-fly renderings/processing templates designed specifically for data visualization.
  • By default, the most recent year is displayed. To discover and isolate specific years for visualization in Map Viewer, try using the Image Collection Explorer.

 

Analysis

  • In order to leverage the optimization for analysis, the capability must be enabled by your ArcGIS organization administrator. More information on enabling this feature can be found in the ‘Regional data hosting’ section of this help doc.
  • Optimized for analysis means this layer does not have size constraints for analysis and it is recommended for multisource analysis with other layers optimized for analysis. See this group for a complete list of imagery layers optimized for analysis.
  • Prior to running analysis, users should always provide some form of data selection with either a layer filter (e.g. for a specific date range, cloud cover percent, mission, etc.) or by selecting specific images. To discover and isolate specific images for analysis in Map Viewer, try using the Image Collection Explorer.
  • Zonal Statistics is a common tool used for understanding the composition of a specified area by reporting the total estimates for each of the classes. 

 

General

  • If you are new to Sentinel-2 LULC, the Sentinel-2 Land Cover Explorer provides a good introductory user experience for working with this imagery layer. For more information, see this Quick Start Guide.
  • Global land use/land cover maps provide information on conservation planning, food security, and hydrologic modeling, among other things. This dataset can be used to visualize land use/land cover anywhere on Earth.

 

Classification Process

These maps include Version 003 of the global Sentinel-2 land use/land cover data product. It is produced by a deep learning model trained using over five billion hand-labeled Sentinel-2 pixels, sampled from over 20,000 sites distributed across all major biomes of the world.

The underlying deep learning model uses 6-bands of Sentinel-2 L2A surface reflectance data: visible blue, green, red, near infrared, and two shortwave infrared bands. To create the final map, the model is run on multiple dates of imagery throughout the year, and the outputs are composited into a final representative map for each year.

The input Sentinel-2 L2A data was accessed via Microsoft’s Planetary Computer and scaled using Microsoft Azure Batch.

 
Citation
Karra, Kontgis, et al. “Global land use/land cover with Sentinel-2 and deep learning.” IGARSS 2021-2021 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2021.

Acknowledgements

Training data for this project makes use of the National Geographic Society Dynamic World training dataset, produced for the Dynamic World Project by National Geographic Society in partnership with Google and the World Resources Institute.
Tags / Keywords
Keywords/tags categorizing the dataset.
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
Dataset Size
Dataset size in megabytes.
0.09
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
Published Date
Published date of the dataset.
2022-10-18
Time Period Data Span (start date)
Start date of the data in the dataset.
Time Period Data Span (end date)
End date of time data in the dataset.
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
Field Value
Access category
Type of access granted for the dataset (open, closed, service, etc).
public
License
License used to access the dataset.
Creative Commons Attribution
Limits on use
Limits on use of data.
Location
Location of the dataset.
https://climate.esri.ca/datasets/esri::sentinel-2-10m-land-use-land-cover-time-series-1
Data Service
Data service for accessing a dataset.
Owner
Owner of the dataset.
esri_imagery
Contact Point
Who to contact regarding access?
Esri
Contact Point Email
The email to contact regarding access?
Publisher
Publisher of the dataset.
Esri
Publisher Email
Email of the publisher.
Author
Author of the dataset.
esri_imagery
Author Email
Email of the author.
Accessed At
Date the data and metadata was accessed.
2026-01-24
Field Value
Identifier
Unique identifier for the dataset.
cfcb7609de5f478eb7666240902d4d3d
Language
Language(s) of the dataset
English
Link to dataset description
A URL to an external document describing the dataset.
https://climate.esri.ca/datasets/esri::sentinel-2-10m-land-use-land-cover-time-series-1
Persistent Identifier
Data is identified by a persistent identifier.
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
Contains data about individuals
Does the data hold data about individuals?
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
Contains Indigenous Data
Does the data hold data about Indigenous communities?
Portal Type
Platform type of the source portal.
Field Value
Version
Version of the datatset
None
Source
Source of the dataset.
None
Version notes
Version notes about the dataset.
Is version of another dataset
Link to dataset that it is a version of.
Other versions
Link to datasets that are versions of it.
Provenance Text
Provenance Text of the data.
Esri
Provenance URL
Provenance URL of the data.
Temporal resolution
Describes how granular the date/time data in the dataset is.
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
Field Value
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
Community Permission
Community permission (who gave permission).
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
Field Value
Number of data rows
If tabular dataset, total number of rows.
8
Number of data columns
If tabular dataset, total number of unique columns.
19
Number of data cells
If tabular dataset, total number of cells with data.
152
Number of data relations
If RDF dataset, total number of triples.
Number of entities
If RDF dataset, total number of entities.
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
Data quality
Describes the quality of the data in the dataset.
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.

0 Comments

Please login or register to comment.