Perinatal mortality, by Females, three-year average, Hamilton Census Metropolitan Area

Original table: Infant and perinatal mortality, by sex, three-year average, Canada, provinces, territories, census metropolitan areas and metropolitan influence zones Frequency: Occasional
Table: 13-10-0110-01 (formerly CANSIM 102-4320)
Release date: 2018-11-29
Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part, Census metropolitan influenced zone

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.

Jeux de données disponibles au téléchargement

Informations supplémentaires

Champ Valeur
Dernière mise à jour mars 25, 2026, 01:50 (TU)
Créé mars 25, 2026, 01:50 (TU)
Domaine / Sujet
Domaine ou sujet du jeu de données catalogué.
Titre
Titre du jeu de données.
Perinatal mortality, by Females, three-year average, Hamilton Census Metropolitan Area
Description
Une description du jeu de données.

Original table: Infant and perinatal mortality, by sex, three-year average, Canada, provinces, territories, census metropolitan areas and metropolitan influence zones Frequency: Occasional
Table: 13-10-0110-01 (formerly CANSIM 102-4320)
Release date: 2018-11-29
Geography: Canada, Province or territory, Census metropolitan area, Census metropolitan area part, Census metropolitan influenced zone

Footnotes: 1 Sources: Statistics Canada, Canadian Vital Statistics, Birth, Death and Stillbirth Databases. The table 13-10-0110-01 is an update of table 13-10-0408-01. 2 Infant mortality corresponds to the death of a child under one year of age. Expressed as a rate per 1,000 live births. 3 Perinatal deaths include late fetal deaths (stillbirths with a gestational age of 28 weeks or more) and early neonatal deaths (deaths of infants aged less than one week). 4 Numbers and rates in this table may differ from those found in similar data published by the Vital Statistics program as the data here have been tabulated based on postal codes available for place of residence. 5 2017 data for Yukon are not available. 6 The number of births, stillbirths, and deaths in Ontario for 2016 and 2017 are considered preliminary. 7 Due to improvements in methodology and timeliness, the duration of data collection has been shortened compared to previous years. As a result, there may have been fewer births and stillbirths captured by the time of the release. The 2017 data are therefore considered preliminary. 8 A census metropolitan area (CMA) is an area consisting of one or more adjacent municipalities situated around a major urban core. To form a census metropolitan area, the urban core must have a population of at least 100,000. The CMAs are those defined for the 2016 Census. To form a census agglomeration, the urban core must have a population of at least 10,000. 9 The metropolitan influenced zone (MIZ) classification is an approach to better differentiate areas of Canada outside of census metropolitan areas and census agglomerations. Census subdivisions that lie outside these areas are classified into one of four zones of influence. They are assigned to categories based on the flow of residents travelling to work in an urban area with a population greater than 10,000. Municipalities where more that 30% of the residents commute to work in an urban core are assigned to the strong MIZ category. Municipalities where between 5% and 30% of the residents commute to work in an urban core are assigned to the moderate MIZ category. Municipalities where between 0% and 5% of the residents commute to work in an urban core are assigned to the weak MIZ category. Municipalities where fewer than 40 or none of the residents commute to work in an urban core are assigned to the zero MIZ category. 10 Geographical areas are modified every 5 years to reflect the most recent census definitions, therefore, data are not strictly comparable historically. 11 Counts and rates in this table are based on three consecutive years of data. 12 The 95% confidence interval (CI) illustrates the degree of variability associated with a rate. 13 Wide confidence intervals (CIs) indicate high variability, thus, these rates should be interpreted and compared with due caution. 14 The following standard symbols are used in this Statistics Canada table: (..) for figures not available for a specific reference period, (...) for figures not applicable and (x) for figures suppressed to meet the confidentiality requirements of the Statistics Act. 15 The figures shown in the tables have been subjected to a confidentiality procedure known as controlled rounding to prevent the possibility of associating statistical data with any identifiable individual. Under this method, all figures, including totals and margins, are rounded either up or down to a multiple of 5. Controlled rounding has the advantage over other types of rounding of producing additive tables as well as offering more protection.
Étiquettes / Mots-clés
Mots-clés/étiquettes catégorisant le jeu de données.
Format (CSV, XLS, TXT, PDF, etc.)
Format de fichier du jeu de données.
Taille du jeu de données
Taille du jeu de données en mégaoctets.
16.0
Identifiant des métadonnées
Identifiant des métadonnées — peut être utilisé comme identifiant unique pour l’entrée du catalogue.
Date de publication
Date de publication du jeu de données.
2022-03-22
Période temporelle des données (date de début)
Date de début des données dans le jeu de données.
Période temporelle des données (date de fin)
Date de fin des données temporelles du jeu de données.
Zone géospatiale couverte
Région spatiale ou lieu nommé couvert par le jeu de données.
Champ Valeur
Catégorie d’accès
Type d’accès accordé pour le jeu de données (ouvert, restreint, service, etc.).
public (affichage de la valeur pour English)
Licence
Licence utilisée pour accéder au jeu de données.
License not specified
Restrictions d’utilisation
Restrictions d’utilisation des données.
Emplacement
Emplacement du jeu de données.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/50f3dea9722b4dde93f9eaf1f73b34ad (affichage de la valeur pour English)
Service de données
Service de données pour accéder à un jeu de données.
Propriétaire
Propriétaire du jeu de données.
jadonvs_McMaster (affichage de la valeur pour English)
Point de contact
Qui contacter concernant l’accès ?
Courriel du point de contact
Courriel à utiliser pour l’accès ?
Éditeur
Éditeur du jeu de données.
Courriel de l’éditeur
Adresse courriel de l’éditeur.
Auteur
Auteur du jeu de données.
jadonvs_McMaster
Courriel de l'auteur
Adresse courriel de l’auteur.
Date d’accès
Date à laquelle les données et métadonnées ont été consultées.
2022-03-22
Champ Valeur
Identifiant
Identifiant unique du jeu de données.
50f3dea9722b4dde93f9eaf1f73b34ad (affichage de la valeur pour English)
Langue
Langue(s) du jeu de données
English
Lien vers la description du jeu de données
Une URL vers un document externe décrivant le jeu de données.
https://hamiltondatacatalog-mcmaster.hub.arcgis.com/datasets/50f3dea9722b4dde93f9eaf1f73b34ad (affichage de la valeur pour English)
Identifiant persistant
Les données sont identifiées par un identifiant persistant.
Identifiant globalement unique
Les données sont identifiées par un identifiant persistant et globalement unique.
Contient des données sur des individus
Le jeu de données contient-il des données sur des individus ?
Contient des données identifiables sur des individus
Le jeu de données contient-il des données identifiables sur des individus ?
Contient des données autochtones
Le jeu de données contient-il des données sur des communautés autochtones ?
Type de portail
Type de plateforme du portail source.
Champ Valeur
Version
Version du jeu de données
None
Source
Source du jeu de données.
None
Notes de version
Notes de version à propos du jeu de données.
Est une version d’un autre jeu de données
Lien vers le jeu de données dont celui-ci est une version.
Autres versions
Lien vers les jeux de données qui en sont des versions.
Texte de provenance
Texte de provenance des données.
URL de provenance
URL de provenance des données.
Résolution temporelle
Décrit la granularité des données temporelles dans le jeu de données.
Résolution géospatiale en mètres
Décrit la granularité (en mètres) des données géospatiales dans le jeu de données.
Résolution géospatiale (par régions)
Décrit la granularité (par régions) des données géospatiales dans le jeu de données.
Champ Valeur
Permission de la communauté autochtone
Qui détient la permission de la communauté autochtone. Qui contacter pour l’accès à un jeu de données concernant des communautés autochtones.
Permission communautaire
Permission communautaire (qui a accordé la permission).
Les communautés autochtones concernées par le jeu de données
Communautés autochtones dont sont issues les données.
Champ Valeur
Nombre de lignes de données
Pour un jeu de données tabulaire, nombre total de lignes.
5
Nombre de colonnes de données
Pour un jeu de données tabulaire, nombre total de colonnes uniques.
4
Nombre de cellules de données
Pour un jeu de données tabulaire, nombre total de cellules contenant des données.
20
Nombre de relations de données
Pour un jeu de données RDF, nombre total de triplets.
Nombre d’entités
Pour un jeu de données RDF, nombre total d’entités.
Nombre de propriétés de données
Pour un jeu de données RDF, nombre total de propriétés uniques utilisées par les triplets.
Qualité des données
Décrit la qualité des données du jeu de données.
Métrique de qualité des données
Une métrique utilisée pour mesurer la qualité des données, telle que les valeurs manquantes ou les formats invalides.

0 Commentaires

Please login or register to comment.