Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018)
A systematic oceanographic monitoring program was initiated in September 1989 at twenty-five monitoring stations in the Passamaquoddy Bay area and approaches by Dr. Shawn Robinson based out of the St. Andrews Biological Station (SABS). Stations were established in a uniform grid pattern of two arcminutes latitude and longitude over the study area in order to develop a database on the spatial patterns of water properties. Monthly measurements of the water column for the temperatures and salinity at all stations was completed using a Seacat SBE 19 internally recording CTD from Sea-bird Electronics Inc. The CTD was programmed to record conductivity, temperature, and depth at a frequency of 2 hz, corresponding to 2 measurements per meter of water depth.
CTD casts were recorded for each of the 25 stations in the study area monthly using the R/V Pandalus, and later the CCGS Viola M. Davidson based out of SABS. The CTD was configured such that the sensors were oriented towards the benthos and the CTD was then attached to a hydraulic winch on the deck of the ship by a stainless steel cable one meter above a weight, and lowered 1 m below the water's surface in order for the CTD to equilibrate for one minute. The CTD was then lowered at 1 m/s to the benthos using a metered block on the winch to determine when the CTD had reached the maximum depth at that station. Once the weight had touched the bottom, the CTD was retrieved from the water, turned off, and placed in a bucket of fresh seawater in order to minimize equilibration time at the next station.
Initially, the CTD measured salinity via water forced through the salinity cell with the drop rate of 1 m/s, but in August 1992, a pump was mounted on the CTD in order to provide a more consistent flow of water across the salinity cell. Surface temperatures were measured from bucket samples collected upon arriving at each station using a hand-held mercury thermometer at each station, and Secchi disk measurements were recorded.
All data were downloaded from the CTD upon return to SABS using a DFO computer and the proprietary Sea-Soft software. Downcast data from each profile was retained, binned into 1 m intervals, and processed to remove data spikes, density inversions, and anomalies due to inadequate instrument equilibration. Processed data was then stored in the DFO's Oracle database (PTRAN) under the IMTA_SABS schema in the INVHYD and INVINF tables. Station numbers and locations are recorded in the CTD_STATIONS table in the IMTA_SABS schema.
Cite this data: Robinson, S. Data of: Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018). Published: October 2019. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, NB. https://open.canada.ca/data/en/dataset/12184962-7879-4214-aef0-b31162f04a27
Jeux de données disponibles au téléchargement
Informations supplémentaires
| Champ | Valeur |
|---|---|
| Dernière mise à jour | octobre 20, 2025, 02:41 (TU) |
| Créé | octobre 20, 2025, 02:41 (TU) |
|
Domaine / Sujet
Domaine ou sujet du jeu de données catalogué.
|
Environment, Oceans |
|
Titre
Titre du jeu de données.
|
Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018) |
|
Description
Une description du jeu de données.
|
A systematic oceanographic monitoring program was initiated in September 1989 at twenty-five monitoring stations in the Passamaquoddy Bay area and approaches by Dr. Shawn Robinson based out of the St. Andrews Biological Station (SABS). Stations were established in a uniform grid pattern of two arcminutes latitude and longitude over the study area in order to develop a database on the spatial patterns of water properties. Monthly measurements of the water column for the temperatures and salinity at all stations was completed using a Seacat SBE 19 internally recording CTD from Sea-bird Electronics Inc. The CTD was programmed to record conductivity, temperature, and depth at a frequency of 2 hz, corresponding to 2 measurements per meter of water depth. CTD casts were recorded for each of the 25 stations in the study area monthly using the R/V Pandalus, and later the CCGS Viola M. Davidson based out of SABS. The CTD was configured such that the sensors were oriented towards the benthos and the CTD was then attached to a hydraulic winch on the deck of the ship by a stainless steel cable one meter above a weight, and lowered 1 m below the water's surface in order for the CTD to equilibrate for one minute. The CTD was then lowered at 1 m/s to the benthos using a metered block on the winch to determine when the CTD had reached the maximum depth at that station. Once the weight had touched the bottom, the CTD was retrieved from the water, turned off, and placed in a bucket of fresh seawater in order to minimize equilibration time at the next station. Initially, the CTD measured salinity via water forced through the salinity cell with the drop rate of 1 m/s, but in August 1992, a pump was mounted on the CTD in order to provide a more consistent flow of water across the salinity cell. Surface temperatures were measured from bucket samples collected upon arriving at each station using a hand-held mercury thermometer at each station, and Secchi disk measurements were recorded. All data were downloaded from the CTD upon return to SABS using a DFO computer and the proprietary Sea-Soft software. Downcast data from each profile was retained, binned into 1 m intervals, and processed to remove data spikes, density inversions, and anomalies due to inadequate instrument equilibration. Processed data was then stored in the DFO's Oracle database (PTRAN) under the IMTA_SABS schema in the INVHYD and INVINF tables. Station numbers and locations are recorded in the CTD_STATIONS table in the IMTA_SABS schema. Cite this data: Robinson, S. Data of: Passamaquoddy Bay monthly Conductivity Temperature and Depth (CTD) sampling (1989 - 2018). Published: October 2019. Coastal Ecosystems Science Division, Fisheries and Oceans Canada, St. Andrews, NB. https://open.canada.ca/data/en/dataset/12184962-7879-4214-aef0-b31162f04a27 |
|
Étiquettes / Mots-clés
Mots-clés/étiquettes catégorisant le jeu de données.
|
|
|
Format (CSV, XLS, TXT, PDF, etc.)
Format de fichier du jeu de données.
|
|
|
Taille du jeu de données
Taille du jeu de données en mégaoctets.
|
|
|
Identifiant des métadonnées
Identifiant des métadonnées — peut être utilisé comme identifiant unique pour l’entrée du catalogue.
|
|
|
Date de publication
Date de publication du jeu de données.
|
2019-10-30 |
|
Période temporelle des données (date de début)
Date de début des données dans le jeu de données.
|
|
|
Période temporelle des données (date de fin)
Date de fin des données temporelles du jeu de données.
|
|
|
Zone géospatiale couverte
Région spatiale ou lieu nommé couvert par le jeu de données.
|
| Champ | Valeur |
|---|---|
|
Catégorie d’accès
Type d’accès accordé pour le jeu de données (ouvert, restreint, service, etc.).
|
|
|
Licence
Licence utilisée pour accéder au jeu de données.
|
Open Government Licence - Canada |
|
Restrictions d’utilisation
Restrictions d’utilisation des données.
|
|
|
Emplacement
Emplacement du jeu de données.
|
https://open.canada.ca/data/en/dataset/12184962-7879-4214-aef0-b31162f04a27 |
|
Service de données
Service de données pour accéder à un jeu de données.
|
|
|
Propriétaire
Propriétaire du jeu de données.
|
Fisheries and Oceans Canada | Pêches et Océans Canada |
|
Point de contact
Qui contacter concernant l’accès ?
|
Government of Canada; Fisheries and Oceans Canada; Coastal Ecosystem Science Division, [email protected] |
|
Courriel du point de contact
Courriel à utiliser pour l’accès ?
|
|
|
Éditeur
Éditeur du jeu de données.
|
|
|
Courriel de l’éditeur
Adresse courriel de l’éditeur.
|
[email protected] |
|
Auteur
Auteur du jeu de données.
|
|
|
Courriel de l'auteur
Adresse courriel de l’auteur.
|
|
|
Date d’accès
Date à laquelle les données et métadonnées ont été consultées.
|
| Champ | Valeur |
|---|---|
|
Identifiant
Identifiant unique du jeu de données.
|
|
|
Langue
Langue(s) du jeu de données
|
|
|
Lien vers la description du jeu de données
Une URL vers un document externe décrivant le jeu de données.
|
|
|
Identifiant persistant
Les données sont identifiées par un identifiant persistant.
|
|
|
Identifiant globalement unique
Les données sont identifiées par un identifiant persistant et globalement unique.
|
|
|
Contient des données sur des individus
Le jeu de données contient-il des données sur des individus ?
|
|
|
Contient des données identifiables sur des individus
Le jeu de données contient-il des données identifiables sur des individus ?
|
|
|
Contient des données autochtones
Le jeu de données contient-il des données sur des communautés autochtones ?
|
|
|
Type de portail
Type de plateforme du portail source.
|
| Champ | Valeur |
|---|---|
|
Version
Version du jeu de données
|
None |
|
Source
Source du jeu de données.
|
None |
|
Notes de version
Notes de version à propos du jeu de données.
|
|
|
Est une version d’un autre jeu de données
Lien vers le jeu de données dont celui-ci est une version.
|
|
|
Autres versions
Lien vers les jeux de données qui en sont des versions.
|
|
|
Texte de provenance
Texte de provenance des données.
|
|
|
URL de provenance
URL de provenance des données.
|
|
|
Résolution temporelle
Décrit la granularité des données temporelles dans le jeu de données.
|
|
|
Résolution géospatiale en mètres
Décrit la granularité (en mètres) des données géospatiales dans le jeu de données.
|
|
|
Résolution géospatiale (par régions)
Décrit la granularité (par régions) des données géospatiales dans le jeu de données.
|
| Champ | Valeur |
|---|---|
|
Permission de la communauté autochtone
Qui détient la permission de la communauté autochtone. Qui contacter pour l’accès à un jeu de données concernant des communautés autochtones.
|
|
|
Permission communautaire
Permission communautaire (qui a accordé la permission).
|
|
|
Les communautés autochtones concernées par le jeu de données
Communautés autochtones dont sont issues les données.
|
| Champ | Valeur |
|---|---|
|
Nombre de lignes de données
Pour un jeu de données tabulaire, nombre total de lignes.
|
|
|
Nombre de colonnes de données
Pour un jeu de données tabulaire, nombre total de colonnes uniques.
|
|
|
Nombre de cellules de données
Pour un jeu de données tabulaire, nombre total de cellules contenant des données.
|
|
|
Nombre de relations de données
Pour un jeu de données RDF, nombre total de triplets.
|
|
|
Nombre d’entités
Pour un jeu de données RDF, nombre total d’entités.
|
|
|
Nombre de propriétés de données
Pour un jeu de données RDF, nombre total de propriétés uniques utilisées par les triplets.
|
|
|
Qualité des données
Décrit la qualité des données du jeu de données.
|
|
|
Métrique de qualité des données
Une métrique utilisée pour mesurer la qualité des données, telle que les valeurs manquantes ou les formats invalides.
|
0 Commentaires