Geological Mapping in the Campbell Range, Southeastern Yukon (Parts of 105 G/8, G/9 and 105 H/5, H/12)

The Finlayson Lake fault zone forms the boundary between autochthonous North American rocks and rocks of the innermost accreted Slide Mountain and Yukon-Tanana terranes in southeastern Yukon. Geological mapping at 1::50 000 scale in a well exposed area of the Campbell Range, southeastern Yukon, was undertaken to examine the kinematics of the Finlayson Lake fault zone and rock types of the Slide Mountain terrane.

Five units were identified: (1) chloritic schist and phyllite, (2) laminated metachert and carbonaceous black slate, (3) tan weathering metachert and maroon siliceous and argillaceous metasiltstone, (4) greenstone and associated breccia, gabbro, metagreywacke, metachert and maroon metasiltstone and (5) serpentinite. Unit 2 is structurally interleaved with submap-scale bodies or layers of serpentinite, hornblende-plagioclase porphyry, plagioclase-potassium fledspar porphyry, quartz-eye muscovite-chlorite phyllite or schist, chloritic schist and minor grey, calcareous metacarbonate. Serpentinite is also exposed in unit 4 and as small slivers along the thrust contact between units 3 and 4.

Lithologically, units 4 and 5 are similar to the upper division of the Slide Mountain terrane in east-central and north-central British Columbia. Unit 2 has similarities with the lowest division of the Sylvester allochthon and is tentatively correlated with the Slide Mountain terrane. Maroon metasiltstone in unit 3 is indistinguishable lithologically from metasiltstone in the overlying greenstone unit suggesting that the eastern thrust fault juxxtaposes parts of the same depositional sequence, ie. The Slide Mountain terrane. Regional correlation of unit 1 is unclear.

Unit 2 is inferred to be bounded to the east and west by northwest-striking faults and to the south, by an east-striking, steeply dipping, normal (north-side down) fault. The northern boundary of unit 2 is unconstrained. Greenstone (unit 4) is thrust towards the southwest over unit 1 in the western part of the map area along a northwest-striking, gently northeast-dipping thrust fault. In the eastern part of the map area, greenstone is thrust towards the northeast over unit 3 along a northwest-striking, moderately southwest-dipping thrust fault. Outcrop data and topographic patterns suggest that the eastern thrust fault is truncated by a northwest-striking, steeply dipping fault and that the normal fault truncates the westernmost northwest-striking fault. The northwest-striking faults are poorly exposed and their kinematics have yet to be determined. However, if they are steep faults, they are likely dextral strike-slip faults.

Field data indicate that the Finlayson Lake fault zone consists of diverging thrust faults and subparallel strike-slip(?) faults. These structures are consistent with the interpretation of the Finlayson Lake fault zone as a transpressive fault zone. More constraints on the relative timing of faulting and the kinematics of the steep faults are required to test this hypothesis,

Jeux de données disponibles au téléchargement

Informations supplémentaires

Champ Valeur
Dernière mise à jour octobre 20, 2025, 02:24 (TU)
Créé octobre 20, 2025, 02:24 (TU)
Domaine / Sujet
Domaine ou sujet du jeu de données catalogué.
Titre
Titre du jeu de données.
Geological Mapping in the Campbell Range, Southeastern Yukon (Parts of 105 G/8, G/9 and 105 H/5, H/12)
Description
Une description du jeu de données.

The Finlayson Lake fault zone forms the boundary between autochthonous North American rocks and rocks of the innermost accreted Slide Mountain and Yukon-Tanana terranes in southeastern Yukon. Geological mapping at 1::50 000 scale in a well exposed area of the Campbell Range, southeastern Yukon, was undertaken to examine the kinematics of the Finlayson Lake fault zone and rock types of the Slide Mountain terrane.

Five units were identified: (1) chloritic schist and phyllite, (2) laminated metachert and carbonaceous black slate, (3) tan weathering metachert and maroon siliceous and argillaceous metasiltstone, (4) greenstone and associated breccia, gabbro, metagreywacke, metachert and maroon metasiltstone and (5) serpentinite. Unit 2 is structurally interleaved with submap-scale bodies or layers of serpentinite, hornblende-plagioclase porphyry, plagioclase-potassium fledspar porphyry, quartz-eye muscovite-chlorite phyllite or schist, chloritic schist and minor grey, calcareous metacarbonate. Serpentinite is also exposed in unit 4 and as small slivers along the thrust contact between units 3 and 4.

Lithologically, units 4 and 5 are similar to the upper division of the Slide Mountain terrane in east-central and north-central British Columbia. Unit 2 has similarities with the lowest division of the Sylvester allochthon and is tentatively correlated with the Slide Mountain terrane. Maroon metasiltstone in unit 3 is indistinguishable lithologically from metasiltstone in the overlying greenstone unit suggesting that the eastern thrust fault juxxtaposes parts of the same depositional sequence, ie. The Slide Mountain terrane. Regional correlation of unit 1 is unclear.

Unit 2 is inferred to be bounded to the east and west by northwest-striking faults and to the south, by an east-striking, steeply dipping, normal (north-side down) fault. The northern boundary of unit 2 is unconstrained. Greenstone (unit 4) is thrust towards the southwest over unit 1 in the western part of the map area along a northwest-striking, gently northeast-dipping thrust fault. In the eastern part of the map area, greenstone is thrust towards the northeast over unit 3 along a northwest-striking, moderately southwest-dipping thrust fault. Outcrop data and topographic patterns suggest that the eastern thrust fault is truncated by a northwest-striking, steeply dipping fault and that the normal fault truncates the westernmost northwest-striking fault. The northwest-striking faults are poorly exposed and their kinematics have yet to be determined. However, if they are steep faults, they are likely dextral strike-slip faults.

Field data indicate that the Finlayson Lake fault zone consists of diverging thrust faults and subparallel strike-slip(?) faults. These structures are consistent with the interpretation of the Finlayson Lake fault zone as a transpressive fault zone. More constraints on the relative timing of faulting and the kinematics of the steep faults are required to test this hypothesis,

Étiquettes / Mots-clés
Mots-clés/étiquettes catégorisant le jeu de données.
Format (CSV, XLS, TXT, PDF, etc.)
Format de fichier du jeu de données.
Taille du jeu de données
Taille du jeu de données en mégaoctets.
Identifiant des métadonnées
Identifiant des métadonnées — peut être utilisé comme identifiant unique pour l’entrée du catalogue.
Date de publication
Date de publication du jeu de données.
2011-04-04
Période temporelle des données (date de début)
Date de début des données dans le jeu de données.
Période temporelle des données (date de fin)
Date de fin des données temporelles du jeu de données.
Zone géospatiale couverte
Région spatiale ou lieu nommé couvert par le jeu de données.
Champ Valeur
Catégorie d’accès
Type d’accès accordé pour le jeu de données (ouvert, restreint, service, etc.).
Licence
Licence utilisée pour accéder au jeu de données.
Open Government Licence - Yukon
Restrictions d’utilisation
Restrictions d’utilisation des données.
Emplacement
Emplacement du jeu de données.
https://open.canada.ca/data/en/dataset/0f7e2122-606a-48b0-a108-b34fa80bb5c2
Service de données
Service de données pour accéder à un jeu de données.
Propriétaire
Propriétaire du jeu de données.
Government of Yukon | Gouvernement du Yukon
Point de contact
Qui contacter concernant l’accès ?
Yukon Geological Survey
Courriel du point de contact
Courriel à utiliser pour l’accès ?
Éditeur
Éditeur du jeu de données.
Courriel de l’éditeur
Adresse courriel de l’éditeur.
[email protected]
Auteur
Auteur du jeu de données.
Courriel de l'auteur
Adresse courriel de l’auteur.
Date d’accès
Date à laquelle les données et métadonnées ont été consultées.
Champ Valeur
Identifiant
Identifiant unique du jeu de données.
Langue
Langue(s) du jeu de données
Lien vers la description du jeu de données
Une URL vers un document externe décrivant le jeu de données.
Identifiant persistant
Les données sont identifiées par un identifiant persistant.
Identifiant globalement unique
Les données sont identifiées par un identifiant persistant et globalement unique.
Contient des données sur des individus
Le jeu de données contient-il des données sur des individus ?
Contient des données identifiables sur des individus
Le jeu de données contient-il des données identifiables sur des individus ?
Contient des données autochtones
Le jeu de données contient-il des données sur des communautés autochtones ?
Type de portail
Type de plateforme du portail source.
Champ Valeur
Version
Version du jeu de données
None
Source
Source du jeu de données.
None
Notes de version
Notes de version à propos du jeu de données.
Est une version d’un autre jeu de données
Lien vers le jeu de données dont celui-ci est une version.
Autres versions
Lien vers les jeux de données qui en sont des versions.
Texte de provenance
Texte de provenance des données.
URL de provenance
URL de provenance des données.
Résolution temporelle
Décrit la granularité des données temporelles dans le jeu de données.
Résolution géospatiale en mètres
Décrit la granularité (en mètres) des données géospatiales dans le jeu de données.
Résolution géospatiale (par régions)
Décrit la granularité (par régions) des données géospatiales dans le jeu de données.
Champ Valeur
Permission de la communauté autochtone
Qui détient la permission de la communauté autochtone. Qui contacter pour l’accès à un jeu de données concernant des communautés autochtones.
Permission communautaire
Permission communautaire (qui a accordé la permission).
Les communautés autochtones concernées par le jeu de données
Communautés autochtones dont sont issues les données.
Champ Valeur
Nombre de lignes de données
Pour un jeu de données tabulaire, nombre total de lignes.
Nombre de colonnes de données
Pour un jeu de données tabulaire, nombre total de colonnes uniques.
Nombre de cellules de données
Pour un jeu de données tabulaire, nombre total de cellules contenant des données.
Nombre de relations de données
Pour un jeu de données RDF, nombre total de triplets.
Nombre d’entités
Pour un jeu de données RDF, nombre total d’entités.
Nombre de propriétés de données
Pour un jeu de données RDF, nombre total de propriétés uniques utilisées par les triplets.
Qualité des données
Décrit la qualité des données du jeu de données.
Métrique de qualité des données
Une métrique utilisée pour mesurer la qualité des données, telle que les valeurs manquantes ou les formats invalides.

0 Commentaires

Please login or register to comment.