Cold-water coral DNA sequences from Eastern Canada: Part 1
Cold-water corals are conspicuous in the waters off Eastern Canada. Despite that, there are few DNA sequence records from specimens collected in the region available in GenBank, and not all species recorded in the region have sequence data regardless of geographic origin. This can limit the use of eDNA techniques to detect and identify corals. Our objective was to sequence and publish sequences for two octocoral DNA barcoding markers: CO1 and MutS. We sequenced and deposited 36 sequences to GenBank from 19 specimens representing three sea pen taxa (Octocorallia: Pennatuloidea): Distichoptilum gracile, Pennatula aculeata, and Protoptilum carpenteri. Identification of all specimens was confirmed by B. M. Neves before submission. Specimens and DNA tissues were donated to the Canadian Museum of Nature, where they are currently stored. This publication is part 1 of a series of GenBank submissions by our lab.
Specimens were collected from across the Northwest Atlantic and originate from depths ranging between 200-1924 meters. Specimens were collected as part of research vessel multispecies trawl surveys or remotely operated vehicle (ROV ROPOS) surveys. DNA was isolated and purified using the QIAgen DNeasy Blood and Tissue kit, with an initial overnight incubation with Proteinase K. Two commonly used octocoral barcoding regions were amplified using previously described primers: 1) COII8068F (McFadden et al., 2004) and COIOCTR (France and Hoover, 2002) for the CO1 gene, and 2) ND42599F (France and Hoover, 2002) and mut3458R (Sánchez et al., 2003) for the MutS gene. Amplifications were conducted using 12.5 µl of Green DreamTaq Master Mix (Thermo Fisher Scientific), 1 µl of template DNA, 0.5 µl of each 10 µM forward and reverse primers, 0.5 µl of 10 µM reverse primer, and 10.5 µl of water. Thermocycling was run as follows: 3 min of initial denaturation at 95 °C, followed by 40 cycles at 95 °C for 30 s, 30 s at annealing temperature of 48 °C, then 65 s at an extension temperature of 72 °C, and a final elongation at 72 °C for 4 min. PCR products were cleaned using Agencourt AMPure XP Beads (Beckman Coulter) and sent to The Center for Advanced Genomics, Toronto, Canada for Sanger sequencing. Sequences were visualized and aligned using Geneious Prime 2022.0.2. Obtained sequences have been deposited in GenBank under accession numbers OQ569768- OQ569784 and OQ420359- OQ420377.
This work was funded by Fisheries and Oceans Canada under an Enhanced Regional Capacity grant (2020-2021) and the Marine Conservation Targets (MCT) program (2021-2024), Newfoundland and Labrador Region.
Datasets available for download
-
GenBank sequences OQ420359-OQ420377_aligned_muts.fasTXT
-
GenBank sequences OQ569768-OQ569784_aligned_cox1.fasTXT
-
Cold-water coral DNA sequences – Metadata_EN.csvCSV
-
Cold-water coral DNA sequences – Metadata_FR.csvCSV
-
Cold-water coral DNA sequences - GDBFGDB/GDB
-
Cold-water coral DNA sequences - Web Map Service - ENEsri REST
-
Cold-water coral DNA sequences - Web Service - FREsri REST
Additional Info
| Field | Value |
|---|---|
| Last Updated | October 20, 2025, 02:52 (UTC) |
| Created | October 20, 2025, 02:52 (UTC) |
|
Domain / Topic
Domain or topic of the dataset being cataloged.
|
Biota, Oceans |
|
Title
Title for the Dataset.
|
Cold-water coral DNA sequences from Eastern Canada: Part 1 |
|
Description
A description of the dataset.
|
Cold-water corals are conspicuous in the waters off Eastern Canada. Despite that, there are few DNA sequence records from specimens collected in the region available in GenBank, and not all species recorded in the region have sequence data regardless of geographic origin. This can limit the use of eDNA techniques to detect and identify corals. Our objective was to sequence and publish sequences for two octocoral DNA barcoding markers: CO1 and MutS. We sequenced and deposited 36 sequences to GenBank from 19 specimens representing three sea pen taxa (Octocorallia: Pennatuloidea): Distichoptilum gracile, Pennatula aculeata, and Protoptilum carpenteri. Identification of all specimens was confirmed by B. M. Neves before submission. Specimens and DNA tissues were donated to the Canadian Museum of Nature, where they are currently stored. This publication is part 1 of a series of GenBank submissions by our lab. Specimens were collected from across the Northwest Atlantic and originate from depths ranging between 200-1924 meters. Specimens were collected as part of research vessel multispecies trawl surveys or remotely operated vehicle (ROV ROPOS) surveys. DNA was isolated and purified using the QIAgen DNeasy Blood and Tissue kit, with an initial overnight incubation with Proteinase K. Two commonly used octocoral barcoding regions were amplified using previously described primers: 1) COII8068F (McFadden et al., 2004) and COIOCTR (France and Hoover, 2002) for the CO1 gene, and 2) ND42599F (France and Hoover, 2002) and mut3458R (Sánchez et al., 2003) for the MutS gene. Amplifications were conducted using 12.5 µl of Green DreamTaq Master Mix (Thermo Fisher Scientific), 1 µl of template DNA, 0.5 µl of each 10 µM forward and reverse primers, 0.5 µl of 10 µM reverse primer, and 10.5 µl of water. Thermocycling was run as follows: 3 min of initial denaturation at 95 °C, followed by 40 cycles at 95 °C for 30 s, 30 s at annealing temperature of 48 °C, then 65 s at an extension temperature of 72 °C, and a final elongation at 72 °C for 4 min. PCR products were cleaned using Agencourt AMPure XP Beads (Beckman Coulter) and sent to The Center for Advanced Genomics, Toronto, Canada for Sanger sequencing. Sequences were visualized and aligned using Geneious Prime 2022.0.2. Obtained sequences have been deposited in GenBank under accession numbers OQ569768- OQ569784 and OQ420359- OQ420377. This work was funded by Fisheries and Oceans Canada under an Enhanced Regional Capacity grant (2020-2021) and the Marine Conservation Targets (MCT) program (2021-2024), Newfoundland and Labrador Region. |
|
Tags / Keywords
Keywords/tags categorizing the dataset.
|
|
|
Format (CSV, XLS, TXT, PDF, etc)
File format of the dataset.
|
|
|
Dataset Size
Dataset size in megabytes.
|
|
|
Metadata Identifier
Metadata identifier – can be used as the unique identifier for catalogue entry
|
|
|
Published Date
Published date of the dataset.
|
2024-01-01 |
|
Time Period Data Span (start date)
Start date of the data in the dataset.
|
|
|
Time Period Data Span (end date)
End date of time data in the dataset.
|
|
|
GeoSpatial Area Data Span
A spatial region or named place the dataset covers.
|
| Field | Value |
|---|---|
|
Access category
Type of access granted for the dataset (open, closed, service, etc).
|
|
|
License
License used to access the dataset.
|
Open Government Licence - Canada |
|
Limits on use
Limits on use of data.
|
|
|
Location
Location of the dataset.
|
https://open.canada.ca/data/en/dataset/59ab7ce5-8d27-443c-bab0-5c699f820c70 |
|
Data Service
Data service for accessing a dataset.
|
|
|
Owner
Owner of the dataset.
|
Fisheries and Oceans Canada | Pêches et Océans Canada |
|
Contact Point
Who to contact regarding access?
|
Government of Canada; Fisheries and Oceans Canada, [email protected] |
|
Contact Point Email
The email to contact regarding access?
|
|
|
Publisher
Publisher of the dataset.
|
|
|
Publisher Email
Email of the publisher.
|
[email protected] |
|
Author
Author of the dataset.
|
|
|
Author Email
Email of the author.
|
|
|
Accessed At
Date the data and metadata was accessed.
|
| Field | Value |
|---|---|
|
Identifier
Unique identifier for the dataset.
|
|
|
Language
Language(s) of the dataset
|
|
|
Link to dataset description
A URL to an external document describing the dataset.
|
|
|
Persistent Identifier
Data is identified by a persistent identifier.
|
|
|
Globally Unique Identifier
Data is identified by a persistent and globally unique identifier.
|
|
|
Contains data about individuals
Does the data hold data about individuals?
|
|
|
Contains data about identifiable individuals
Does the data hold identifiable data about individual?
|
|
|
Contains Indigenous Data
Does the data hold data about Indigenous communities?
|
|
|
Portal Type
Platform type of the source portal.
|
| Field | Value |
|---|---|
|
Version
Version of the datatset
|
None |
|
Source
Source of the dataset.
|
None |
|
Version notes
Version notes about the dataset.
|
|
|
Is version of another dataset
Link to dataset that it is a version of.
|
|
|
Other versions
Link to datasets that are versions of it.
|
|
|
Provenance Text
Provenance Text of the data.
|
|
|
Provenance URL
Provenance URL of the data.
|
|
|
Temporal resolution
Describes how granular the date/time data in the dataset is.
|
|
|
GeoSpatial resolution in meters
Describes how granular (in meters) geospatial data is in the dataset.
|
|
|
GeoSpatial resolution (in regions)
Describes how granular (in regions) geospatial data is in the dataset.
|
| Field | Value |
|---|---|
|
Indigenous Community Permission
Who holds the Indigenous Community Permission. Who to contact regarding access to a dataset that has data about Indigenous communities.
|
|
|
Community Permission
Community permission (who gave permission).
|
|
|
The Indigenous communities the dataset is about
Indigenous communities from which data is derived.
|
| Field | Value |
|---|---|
|
Number of data rows
If tabular dataset, total number of rows.
|
|
|
Number of data columns
If tabular dataset, total number of unique columns.
|
|
|
Number of data cells
If tabular dataset, total number of cells with data.
|
|
|
Number of data relations
If RDF dataset, total number of triples.
|
|
|
Number of entities
If RDF dataset, total number of entities.
|
|
|
Number of data properties
If RDF dataset, total number of unique properties used by the triples.
|
|
|
Data quality
Describes the quality of the data in the dataset.
|
|
|
Metric for data quality
A metric used to measure the quality of the data, such as missing values or invalid formats.
|
0 Comments